Model US - 50 Year SlimLineTM Reference

Typical Application Featuring

Housing Specifications
Size – 1 5/8 inch dia. x 22 inch long
           (4.2 cm dia. x 56 cm long)
Shipping weight – 6 lb (2.7 kg)
 Element Types
AGG - saturated gelled Ag/AgCl
CUG - saturated gelled Cu/CuSO4
Element Specifications
Design life – 50 years
Shelf life – 1 year minimum
Stability - ± 5 mV
 Terminations
SW – 50 feet (15 m) of #14 AWG HMW/PE
LWnnn - nnn feet #14 AWG HMW/PE
CWnnn - nnn feet of custom wire
              (#12 HMWPE is the largest size wire that can be used on this model)
Model Designation
Specify as EDI Model US-xxx-yy
xxx = Element type
  yy = Termination type
Design Compatability
The Model US50 is designed for installation in a 2 inch (5 cm) diameter hole. It is ideal for retrofit through asphalt or concrete where it is difficult or costly to drill a larger diameter hole. This electrode can be used between storage tanks at service stations or between the primary and secondary containment of an aboveground storage tank. Also, the Model US50 weighs far less than the industry standard bagged electrode, which reduces shipping costs where this is a consideration.

Installation
Drill a 2 inch (5 cm) dia. hole, lower the electrode into place and slurry in backfill.