| 1. When connector halves are fully mated, points "A" will align. |
| 2. Current output not to exceed 10 mA/ft/wire. Use multiple wire anodes for higher current output. |
| 3. Individual anodes may be interconnected to form strings of any desired length. Power feeds must be no more than 1,000 feet apart on single wire anodes. |
| 4. Current should be fed into anode strings from both ends. Longer strings should have additional intermediate feeds. |
| 5. Assemble individual anodes into strings by pressing pin end fully into socket end. The joint and be made permanent by using any solvent cement suitable for use with CPVC. |
